COMMERCIAL / INDUSTRIAL WORKSHOP – 10m x 15m x 6m to eaves

£23,997.00 excl VAT

Single Skin Mono-Pitch Steel Building with 500mm overhang on all eaves. Ideal for commercial usage or industrial workshop / unit.

Building available in a variety of colours. Colour shown is Goosewing Grey.

Description

Building Description:

Commercial industrial workshop, Single Skin Mono-Pitch Steel Building with 500mm overhang on all eaves. Ideal for commercial usage or industrial workshop / unit.

Building available in a variety of colours. Colour shown is Goosewing Grey.

Dimensions:

10m x 15m x 6m to eaves with a 5 degree pitch roof

Doors:

2x Electric roller shutter doors – 3.48m wide x 4.2m high & 3.48m wide x 4.9m high

2x Personnel Access doors, one on side & one on rear gable.

3x 2000mm x 1000mm windows

Wall Cladding:

24mm Box Profile Wall Cladding, Single Skin. Plastisol coated steel sheeting. Supplied by Steadmans.

Roof Detail:

30mm Box Profile Roof Cladding, Single Skin. Plastisol coated steel sheeting. 5 degrees pitch with anti-condensation barrier. Skylights optional. Supplied by Steadmans.

Rain Water:

Guttering & Downpipes – Galvanised Steel hot dipped in Plastisol coating.

All Base, Eaves & Ridge Fillers Included.

Fixings:

All necessary screws (coloured cap-less finishing screws), bolt sets, masonry anchors, screw caps, brackets required to erect this building are supplied.

Framing:

Made from cold rolled Cee-section columns and rafters. All Purlins used are Top-hat sections.

All framework is hot dipped galvanised steel to BS EN 10346:2009 Fe E390G-Z275.

The sections are designed to BS EN 1993-1-3:2006 using a combination of rational analysis and component testing.

Click here to see our FAQ.